Configuring SIP device - Linksys PAP2T device for Voipbuster

Steps to configure Linksys PAP2T:
1. You need a VoipBuster username and password in order to call via Voipbuster network. So first sign up with VoipBuster by downloading and installing the application and create your login.

You can use VoipBuster with the many types of Sip devices: SIP ATA (Analogue Telephone Adapter)
Pre-Requisites:
a. Connect your line from your (A)DSL provider to the Modem/Router
b. Connect the provided LAN cable from your PAP2T device(internet Port) to the router/modem's LAN port
c. Connect the Telephone cable to PAP2T device(Line1 port) and your analogue telephone
d. Connect the power adapter to the device
 
2. Linksys settings:

Login into your PAP2T device with http://; in my case http://192.168.2.3
Change login mode to Admin User by clicking on the top right link. Click on Line 1 and then follow the steps below:

• Line Enable: Yes
• SIP Port : portnumber 5060
• Proxy: fill in sip.voipbuster.com
• Register: this is 'Yes'
• Make Call Without Reg: fill in 'Yes'
• Register Expires: this is 3600 seconds
• Ans Call Without Reg: fill in 'No'
• Display name: you can fill-in your name, this name will be displayed in the phone screen of the person you are calling
• User ID: fill in your username, this is the username you used for the registration of your VoipBuster-account
• Password: fill in your password, this is the password you used for the registration of your VoipBuster-account 
• Use Auth ID: set to 'No'

Other devices: Software configuration:(General)

SIP port : 5060
Registrar : sip.voipbuster.com
Proxy server : sip.voipbuster.com
Outbound proxy server : leave empty
Account name : your VoipBuster username
Password : your VoipBuster password
Display name/number : your VoipBuster username or voipnumber
Stunserver (option) : stun.voipbuster.com

 

 The clarity was very good once connected. Trying to connect Gizmo VOIP services. Once successful will convey the steps.